Cisco Cisco SG500-52PP 52-port Gigabit Max PoE+ Stackable Managed Switch 技术参考
DHCP Snooping and ARP Inspection Commands
78-21491-01 Command Line Interface Reference Guide
767
44
44.6
ip dhcp snooping database
Use the ip dhcp snooping database Global Configuration mode command to
enable the DHCP Snooping binding database file. Use the no form of this
command to delete the DHCP Snooping binding database file.
enable the DHCP Snooping binding database file. Use the no form of this
command to delete the DHCP Snooping binding database file.
Syntax
ip dhcp snooping database
no ip dhcp snooping database
Parameters
N/A
Default Configuration
The DHCP Snooping binding database file is not defined.
Command Mode
Global Configuration mode
User Guidelines
The DHCP Snooping binding database file resides on Flash.
To ensure that the lease time in the database is accurate, the Simple Network Time
Protocol (SNTP) must be enabled and configured.
Protocol (SNTP) must be enabled and configured.
The device writes binding changes to the binding database file only if the device
system clock is synchronized with SNTP.
system clock is synchronized with SNTP.
Example
The following example enables the DHCP Snooping binding database file.
Console(config)#
ip dhcp snooping database
44.7
ip dhcp snooping database update-freq
Use the ip dhcp snooping database update-freq Global Configuration mode
command to set the update frequency of the DHCP Snooping binding database
file. Use the no form of this command to restore the default configuration.
command to set the update frequency of the DHCP Snooping binding database
file. Use the no form of this command to restore the default configuration.