Cisco Cisco UCS B440 M1 High-Performance Blade Server 数据表

Cisco UCS B260 M4 Blade Server (with Intel® Xeon® E7 v4 CPU)

SUPPLEMENTAL MATERIAL

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/blade-servers/B260M4.html

Thermal Grease (with syringe applicator) for CPU to Heatsink Seal

Thermal grease must be applied to the top of the CPU where it comes in contact with the heat sink.
Instructions for applying thermal grease are found at:

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/blade-servers/B260M4.html

CPU Heat Sink Cleaning Kit

The cleaning kit is used to remove the existing thermal compound from the bottom of the heat sink during
a CPU replacement process. Instructions for cleaning are found at the following link:

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/blade-servers/B260M4.html

NOTE: When you purchase a spare CPU, the Pick n Place Toolkit is included.

CAUTION:

DO NOT use thermal grease available for purchase at any commercial
electronics store. If these instructions are not followed, the CPU may
overheat and be destroyed.

NOTE: When you purchase a spare CPU, the thermal grease with syringe applicator
is included.

NOTE: When you purchase a spare CPU, the CPU cleaning kit is included.