Intel D845GVSR D845GVSRL 用户手册
产品代码
D845GVSRL
69
3 Overview of BIOS Features
What This Chapter Contains
3.1 Introduction
The Desktop Board D845GVSR uses an Intel/AMI BIOS that is stored in the Firmware Hub
(FWH) and can be updated using a disk-based program. The FWH contains the BIOS Setup
program, POST, the PCI auto-configuration utility, and Plug and Play support.
(FWH) and can be updated using a disk-based program. The FWH contains the BIOS Setup
program, POST, the PCI auto-configuration utility, and Plug and Play support.
The BIOS displays a message during POST identifying the type of BIOS and a revision code. The
initial production BIOSs are identified as VA84510A.86A.
initial production BIOSs are identified as VA84510A.86A.
When the Desktop Board’s jumper is set to configuration mode and the computer is powered-up,
the BIOS compares the CPU version and the microcode version in the BIOS and reports if the two
match.
the BIOS compares the CPU version and the microcode version in the BIOS and reports if the two
match.
For information about
Refer to
The Desktop Boards’ compliance level with Plug and Play
Section 1.5, page 17