Brother RJ-2150 参考指南
Raster Command Reference
- 29 -
7. Printing Command Details
ESC i a
Switch dynamic command mode
ASCII:
ESC
i
a
{n1}
Hexadecimal: 1B
69
61
{n1}
Parameters
Definitions of {n}:
0: ESC/P mode (default)
1: Raster mode (Be sure to switch to this mode.)
3: P-touch Template mode
Description
Dynamically switches between the printer's command modes. A printer that receives this command
operates in the specified command mode until the printer is turned off.
The printer must be switched to raster mode before raster data is sent to it. Therefore, send this command
to switch the printer to raster mode.