Samsung TC242W 用户手册

2 Using "Windows Embedded Standard 7"

Using "Windows Embedded Standard 7"

2.1

What is "Windows Embedded Standard 7" Client?

The Microsoft Windows Embedded Standard 7 (WES7) client uses the Microsoft Windows

Embedded Standard 2011 OS. When the WES client is connected to a server where Citrix

XenDesktop, VMware Horizon, or Microsoft Remote Desktop Connection service is available, the

keyboard, mouse, audio/video, and display data will be forwarded to the client through the network

between the client and server.

Connectable Servers



A Citrix XenDesktop Server



Microsoft Windows Server 2008, 2008R2, 2012, 2012R2 where the Terminal Service and

Citrix XenServer are installed



A VMware Horizon Server



Microsoft Windows Server 2008, 2008R2, 2012, 2012R2 where the Terminal Service and

VMWare Server are installed



A Microsoft RDP (Remote Desktop Protocol) Server



Microsoft Windows Server 2008, 2008R2, 2012, 2012R2 where the Terminal Service are

installed



Microsoft Windows 7 Professional

This manual describes the functions provided by the WES Client. However, it does not explain general

functionalities of WES. For more general information on WES7, refer to WES7 Help provided by

Microsoft.



Wake On LAN

This feature allows you to power on the product by sending a pre-determined command from an

external system to the product over a network.

Make sure the network is capable of data communication with the PC that sends the command to

the product. Ensure you have a program that can generate Wake on LAN signals.



Make sure a power supply is always connected to ensure the feature works when the product

is turned off.



The feature is intended to power on the product. (It does not support the function to power off

the product.)

Configuring the settings

Press the power button on the product to turn on the power LED. Press F2 to access the BIOS

setup page.

Go to AMD

Platform and set Wake on LAN option to Disable or Enable.

(Default setting is Enable.)

Press F10 to save the change (Save) and select Yes at the prompt to exit from the current

session.