Samsung SR10F71UB 用户手册

下载
页码 248
troubleshooting _43
05 TROUBLESHOOTING
CHECKLIST BEFORE SVC CALLS
Symptom
Checklist
Measure to Take
Vacuum cleaning 
robot does not 
operate at all before 
cleaning.
•  Is the dust bin assembled?
•  Install the dust bin.
•  Is the Power Switch turned on?
•  Turn on the Power Switch.
•  Is cleaning mode 
 in the display 
panel turned on?
• Press 
the   button. (To turn it 
off, press and hold the 
 button 
down for 3 seconds or longer.)
•  Is the battery level fl ashing only 
one level and is ‘Lo’ displayed in 
the display panel?
•  Lift up the vacuum cleaning robot, 
and manually dock the vacuum 
cleaning robot onto the charger to 
charge it.
•  Vacuum cleaning robot will not 
operate when the battery in the 
remote control is depleted.
•  Replace the batteries in the remote 
control. (AAA type)
Vacuum cleaning 
robot stopped 
operating while 
cleaning.
•  Is the battery level fl ashing only 
one level and is ‘Lo’ displayed in 
the display panel?
•  Lift up the vacuum cleaning robot, 
manually dock the robot onto the 
charger to charge it.
•  Has the vacuum cleaning robot 
become hooked on wires on the 
fl oor?
•  Turn off the Power Switch and 
remove the wires.
•  Is the vacuum cleaning robot stuck 
to the fl oor where there is a height 
difference?
 
-
The driving wheel is lifted.
•  Turn off the Power Switch and 
move the cleaning vacuum 
cleaning robot to another place to 
clean.
•  Is there a thin towel (cloth) 
wrapped around the driving wheel?
•  Turn off the Power Switch and 
remove the thin towel.
•  Is the vacuum cleaning robot stuck 
on the doorsill?
•  Turn off the Power Switch and 
move the vacuum cleaning robot 
to another place to clean.
The suction power is 
weak while cleaning.
•  Check whether the dust bin is full 
of dust.
•  Stop the vacuum cleaning robot 
and empty the dust bin.
•  Check whether the suction inlet is 
clogged by foreign substances.
•  Turn off the Power Switch and 
remove the foreign substances on 
the suction inlet.
•  Check whether the fi lter is clogged. •  Clean the fi lter well.
troubleshooting
DJ68-00691A.indb   43
DJ68-00691A.indb   43
13. 01. 25   오후 2:01
13. 01. 25   오후 2:01