Samsung FSR-14 用户手册
English - 21
SETTING
UP
3. Insert the clamp ( A ) in the direction of arrow
( 1 ) and then lower it in the direction of arrow
( 2 ) to lock it in place.
A
①
②
A
4. Hook up the electrical wire connector.
The display may not function properly if
you neglect to connect the electrical wires
while assembling the door.
2. RE-ATTACH THE REFRIGERATOR
DOOR
To re-attach the REFRIGERATOR door, assemble
the parts in reverse order.
CAUTION
3. RE-ATTACH THE COLD
COMPARTMENT SHOW CASE DOOR
To re-attach the COLD COMPARTMENT SHOW
CASE DOOR, assemble the parts in reverse order.
4. RE-ATTACH THE HINGE COVER
1. Open the refrigerator doors.
2. Attach the hinge cover to the top of the
refrigerator.
Secure the cover in place with the three screws
you removed earlier using a Phillips screwdriver.
5. RE-ATTACH THE WATER SUPPLY
LINER
1. The Water Line must be fully Inserted to the
center of the transparent coupler to prevent
water leakage from the dispenser.
2. Insert the 2 clips in the install pack and check
that each clip holds the line firmly.
Center of Transparent coupler
Clip A (1/4”)
(6.35 mm)
Keep the clips out of the reach of children
and make sure that children do not play
with them or put them into their mouths.
CAUTION
DA68-02976R-00.indb 21
2016. 8. 1. �� 10:51