Samsung MX-HS7000 用户手册
03
Functions
Functions
3. Select a station by:
• Pressing and holding the
TUNING/ALBUM
,
or . button on the remote control to
automatically search for active broadcasting
stations.
4. Press the MO/ST button to switch between
stereo and mono.
• In a poor reception area, select
• In a poor reception area, select
MONO for
a clear, interference-free broadcast.
• This applies only when listening to an FM
station.
5. If you do not want to store the radio station
found, go back to Step 3 and search for
another station.
Otherwise:
a. Press the ¬ button.
b. Or, press the TUNING/ALBUM button
Otherwise:
a. Press the ¬ button.
b. Or, press the TUNING/ALBUM button
on the remote control to select a program
number in the
PRESET mode.
c. Press the ¬ button to save the preset.
6. To store any other radio frequencies required,
repeat Steps
3 to 5.
|NOTES |
✎
In Tuner mode
- In the Manual mode, you can use the 1 or
2
button or the
DJ JOG control.
- In the Preset mode, you can use the 1 or
2
button or the
DJ JOG control on the
product to search for a stored radio station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER/AUX
1. Select FM by pressing the TUNER/AUX
button on the product or remote control.
2. Press the TUNING MODE button on the
remote control until “
PRESET” is displayed.
3. Press 1, 2 button on the main unit or
TUNING/ALBUM ,, . on the remote
control to select a preset number.
or
Turn the
DJ JOG control left or right on the
main unit to select the stored station.
Timer Function
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Press the TIMER SET button on the remote
1. Press the TIMER SET button on the remote
control twice. "
CLOCK " is displayed.
2. Press the ¬ button on the remote control.
The hour flashes.
• To increase the hours:
• To increase the hours:
TUNING/ALBUM ,
• To decrease the hours:
TUNING/ALBUM .
3. When the correct hour is displayed, press the
¬
button, and then the minutes flash.
• To increase the minutes:
TUNING/ALBUM ,
• To decrease the minutes:
TUNING/ALBUM .
4. When the correct minute is displayed, press
the ¬ button, and then "
TIME" appears in
the display.
Setting the Timer
The timer enables you to set the product to switch
on or off at specific times automatically.
• Before setting the timer, check that the current
• Before setting the timer, check that the current
time is correct.
• For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
• If you no longer want the product to be switched
on or off automatically, you must cancel the
timer by pressing the
TIMER ON/OFF button.
Example: You want to wake up to
music every morning.
1. Press the TIMER SET button until
TIME is
displayed.
2. Press the ¬ button.
Result:
ON is displayed for a few seconds.
You can set the timer switch-on time.
19
English
02680B-MX-HS6000-XY-ENG-20140227.indd 19
2014/4/25 8:36:40