Samsung Curved Monitor (CF791 Series) 用户手册
36
PC/AV Mode
Set
PC/AV Mode
to
AV
. The picture size will be enlarged.
This option is useful when you view a movie.
• Set to
PC
when connected to a PC.
• Set to
AV
when connected to an AV device.
― This feature is only available on the widescreen models that include 16:9, 16:10 and 21:9.
― If the monitor is in
HDMI 1
,
HDMI 2
or
DisplayPort
mode and the screen says
Check Signal Cable
or power
saving mode activates, press the JOG button to display the function-button screen and then select the
icon. You can select
PC
or
AV
.
DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the monitor is in
HDMI 1
,
HDMI 2
or
DisplayPort
mode and the screen says
Check Signal Cable
or power
saving mode activates, press the JOG button to display the function-button screen and then select the
icon. You can select
1.1
or
1.2
.
HDMI Mode
Select the HDMI mode to use.
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink or the setup window in your PC may be changed.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the
device.
•
1.4
: HDMI 1.4 input is supported. The product supports the vertical frequency up to 50 Hz in the
maximum resolution (3440 x 1440).
•
2.0
: HDMI 2.0 input is supported. The product supports the vertical frequency up to 100 Hz in the
maximum resolution (3440 x 1440). For use of HDMI 2.0, you must use the graphic card and the
standard cable that support HDMI 2.0.
standard cable that support HDMI 2.0.
Source Detection
Select either
Auto
or
Manual
as the method to recognize input signal.
― Not available when
PIP/PBP Mode
is set to
On
.
Key Repeat Time
Acceleration
,
1 sec
, or
2 sec
can be selected. If
No Repeat
is selected, a command responds only once
when a button is pressed.