Samsung 27,5" HDTV-näyttö urheilufaneille 用户手册
Basic Features
Satellite System
(for TD310ES model)
Satellite System
is available when
Antenna
is set to
Satellite
. Before running
Auto Tuning
, set
Satellite System
. Then
channel scan is run normally.
•
Satellite Selection
: You can choose the satellites for this TV.
•
LNB Power
(
Off
/
On
): Enables or disables the power supply for the LNB.
•
LNB Settings
: Configures the outdoor equipment.
–
Satellite
: Selects the satellite for receiving digital broadcasts.
–
Transponder
: Selects a transponder from the list or adds a new transponder.
–
DiSEqC Mode
: Selects DiSEqC mode for the selected LNB.
–
Lower LNB Oscillators
: Sets the LNB oscillators to a lower frequency.
–
Upper LNB Oscillators
: Sets the LNB oscillators to a higher frequency.
–
Tone 22 kHz
(
Off
/
On
/
Auto
): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it
should be Auto.
–
Signal Quality
: Display the current status of broadcasting signal.
•
Positioner Settings
: Configures the antenna positioner.
Positioner
(
On
/
Off
): Enables or disables the positioned control.
Positioner Type
(
USALS
/
DiSEqC 1.2
): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite
Automatic Location System).
–
My Longitude
: Sets the longitude for my location.
–
My Latitude
: Sets the latitude for my location.
–
Satellite Longitude Settings
: Sets the longitude of user defined satellites.
User Mode
: Sets the position of satellite antenna according to each satellite. If you store the current position of
satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can
be moved to pre-populated position.
be moved to pre-populated position.
–
Satellite
: Selects the satellite to set the position for.
–
Transponder
: Selects a transponder from the list for signal reception.
–
Moving Mode
: Selects the movement mode between discrete and continuous movement.
–
Step Size
: Adjusts the step size degrees for the antenna rotation. Step Size is available when Moving Mode is
set to Step.
–
Go To Stored Position
: Rotates the antenna to the stored satellite position.
–
Aerial Position
: Rotate the aerial and store position for this satellite.
–
Store Current Position
: Stores current position as the selected positioner limit.
–
Signal Quality
: Display the current status of broadcasting signal.
English - 48
English - 49