Samsung T27B750EW 用户手册
Switching between Anynet+ Devices
1. Open the
Tools
menu using your remote, and then select
Anynet+ (HDMI-CEC)
.
2. Select
Device List
. The
Device List
screen appears.
✎
If you cannot find a device you want, select
Refresh
to refresh the list.
3. Select a device, and then wait until the switch to the selected device is completed.
✎
The
Device List
menu appears only when you set
Anynet+ (HDMI-CEC)
to
On
in the
System
menu.
✎
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation
while switching is in progress.
while switching is in progress.
✎
If you have selected an Anynet+ device using the
Source
function , you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device using the
Device List
function.
Listening through a Receiver
You can listen to sound through a receiver (i.e. Home Theatre) instead of the product Speaker. To listen to sound through
a receiver, go to
a receiver, go to
Receiver
screen (
System
→
Anynet+ (HDMI-CEC)
→
Receiver
). Then select
Receiver
and set to
On
.
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) port of the product.
OUT (OPTICAL) port of the product.
✎
When the receiver (i.e. Home Theatre) is set to on, you can hear sound output from the product’s Optical jack.
When the product is displaying a DTV (air) signal, the product will send out 5.1 channel sound to the receiver.
When the source is a digital component such as a DVD player and it is connected to the product via HDMI, you
will hear only 2 channel sounds from the receiver.
When the product is displaying a DTV (air) signal, the product will send out 5.1 channel sound to the receiver.
When the source is a digital component such as a DVD player and it is connected to the product via HDMI, you
will hear only 2 channel sounds from the receiver.
Using the ARC function
You can listen to sound from the product through a receiver connected using an HDMI cable without connecting a
separate optical cable. To listen to sound through a receiver using the ARC function, go to
separate optical cable. To listen to sound through a receiver using the ARC function, go to
Receiver
screen (
System
→
Anynet+ (HDMI-CEC)
→
Receiver
). Then select
Receiver
and set to
On
.
✎
To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the
HDMI IN 2 (MHL / ARC) port.
HDMI IN 2 (MHL / ARC) port.
✎
To disable the ARC function, set the
Receiver
to
Off
. Even if the product transmits the ARC signal continuously,
the receiver will be blocked from receiving the signal.
English - 164
English - PB
Advanced Features