Samsung RL55VTEBG 用户手册

14_

setting up

2. Remove the Top cover. Make sure to disconnect

the wire underneath the Top cover.

Be careful not to damage the electrical wires
when removing the Top cover.

3. Disconnect the wire and then remove 3 bolts on

the top of the refrigerator.

Make sure the Fridge door is closed ﬁ rmly.

4. Remove the Fridge door from the Middle hinge

by carefully lifting the door straight up.

Fridge door is heavy, be careful not to injure
yourself when removing the Fridge door.

5. Disassemble the Middle hinge by removing 2

bolts and a screw on the right side.
Remove the Freezer door from the Bottom hinge
by carefully lifting the door straight up.

Freezer door is heavy, be careful not to
injure yourself when removing the Freezer
door.

REVERSING THE
REFRIGERATOR DOOR

Samsung recommends that reversing of
the door opening is only completed by
Samsung approved Service providers.
This will be on a chargeable basis and at the
customers expense.

Any damage caused while attempting to
reverse the door opening is not covered
under the appliance manufactures warranty.
Any repairs requested due to this
circumstance will be completed on a
chargeable basis at the customers expense.

Required Tools

Not provided

Phillips Head

Driver (+)

Flat Head

Driver (-)

10mm Socket

Wrench

(for bolts)

Not provided

Additional part

11mm Wrench

(for hinge shaft)

3/16” Allen

Wrench

(for middle

hinge)

Top Left

Hinge Cover

(Underneath the

Top Cover)

1. Remove 4 screws on the Top cover of the

refrigerator.

Make sure your refrigerator is unplugged
before handling electrical wires.

Screw

Middle hinge

Bottom hinge

WARNING

CAUTION

DA99-02116P-11.indb 14

2016. 3. 24.

10:50

2016. 3. 24.

10:50