Samsung Samsung Zero Client Monitor NC221, 6x USB 用户手册
39
Using "PCoIP"
2
2 Using "PCoIP"
Network Tab
You can configure the host and client network settings from the
Initial Setup
page or
Network
page.
After you update the parameters on this page, click
Apply
to save your changes.
The Network parameters can also be configured using the Administrative Web Interface.
Figure 2-3:
Network
Configuration
Enable DHCP
When
Enable DHCP
is enabled, the device will contact a DHCP server to be assigned an IP
address, subnet mask, gateway IP address and DNS servers. When disabled, the device requires
these parameters to be set manually.
IP Address
The IP address of the device. If DHCP is disabled, you must set this field to a valid IP address.
If DHCP is enabled, you cannot edit this field.
Subnet Mask
The subnet mask of the device. If DHCP is disabled, you must set this field to a valid subnet mask.
If DHCP is enabled, you cannot edit this field.
It is possible to configure an illegal IP address/subnet mask combination (e.g., invalid mask)
making the device unreachable. Ensure you set the subnet mask properly.
Gateway
The gateway IP address of the device. If DHCP is disabled, this field is required. If DHCP is enabled,
you cannot edit this field.
Primary DNS Server
The primary DNS IP address of the device. This field is optional. If the DNS server IP address is
configured using the Connection Manager, the address may be set as an FQDN instead of an IP
address.