Samsung SRF645CDBLS 用户手册
English 39
Installation
To connect the water filtering hose to the water line
Remove cap
a
a
A
B
a
A. Water Line from unit
B. Water Line from Kit
B. Water Line from Kit
1. Loosen and remove the compression
nut (a) from the water line of the
refrigerator, and insert it to the water
filtering hose.
refrigerator, and insert it to the water
filtering hose.
2. Tighten up the compression nut (a) to
connect the water filtering hose and the
water line.
water line.
3. Open the main water valve and check
for any leaks.
4. If there are no leaks, dispense about a
3 liters of water before actually using
the refrigerator to remove impurities
inside the water filtering system.
the refrigerator to remove impurities
inside the water filtering system.
NOTE
If you have to relocate the refrigerator
after connecting the water line, make sure
the joined section of the water line must is
straight.
after connecting the water line, make sure
the joined section of the water line must is
straight.
To repair the water line
CAUTION
The waterline must be repaired by a qualified professional. If you encounter a water leak,
contact a local Samsung service centre or the installer of the waterline.
contact a local Samsung service centre or the installer of the waterline.
Untitled-7 39
2017-03-15 12:26:23