Samsung RF26HFENDSR/AA 用户手册
English - 8
When moving your refrigerator
To prevent fl oor damage, be sure the front
adjusting legs are in the up position (above
the fl oor). Refer to ‘Adjusting the Level’ in
the manual (on page 11).
adjusting legs are in the up position (above
the fl oor). Refer to ‘Adjusting the Level’ in
the manual (on page 11).
Flat-blade screw
driver(-)
driver(-)
Control Lever
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor.
This surface should be strong enough to support
a fully loaded refrigerator.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull
and push it straight forwards or back.
Do not wiggle it from side to side.
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor.
This surface should be strong enough to support
a fully loaded refrigerator.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull
and push it straight forwards or back.
Do not wiggle it from side to side.
CAUTION
ACCESSORIES AND
REQUIRED TOOLS
REQUIRED TOOLS
The following accessories are included with your
refrigerator:
refrigerator:
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
installation of your refrigerator:
Philips
screwdriver(+)
Flat-blade screw
driver(-)
Socket wrench
Allen wrench
REMOVING THE
REFRIGERATOR DOORS
REFRIGERATOR DOORS
For some installations you need to remove the
fridge and freezer drawers so you can move the
refrigerator to its fi nal location. Do not remove
the doors/drawer if you don’t need to. If you do
not need to remove the refrigerator doors, go to
Adjusting the Level on page 11. If you need to
remove the doors. continue below.
fridge and freezer drawers so you can move the
refrigerator to its fi nal location. Do not remove
the doors/drawer if you don’t need to. If you do
not need to remove the refrigerator doors, go to
Adjusting the Level on page 11. If you need to
remove the doors. continue below.
Before removing the door/drawer, make sure you
read the following items:
read the following items:
Disconnect power to the refrigerator before
removing the door or drawer.
removing the door or drawer.
• Be careful not to drop, damage or
scratch the door/drawer while removing
them.
them.
• Use care when remove the doors/drawer.
The doors are heavy and you could injure
yourself.
yourself.
WARNING
DA68-02601C-00.indb 8
Compression Fitting
Compression Nut (1/4")