Samsung MX-HS7000 用户手册

3.    Select a station by:

•  Pressing and holding the TUNING/

ALBUM , or . button on the remote 

control to automatically search for active 
broadcasting stations.

4.   Press the MO/ST button to switch between 

stereo and mono.
•  In a poor reception area, select MONO 

for a clear, interference-free broadcast.

•  This applies only when listening to an 

FM station.

5.  If you do not want to store the radio station 

found, go back to Step 3 and search for 
another station.

a.  Press the ¬ button.
b.  Or, press the TUNING/ALBUM button 

on the remote control to select a 
program number in the PRESET mode.

c.  Press the ¬ button to save the preset.

6.  To store any other radio frequencies 

required, repeat Steps 3 to 5.

✎

 

- In the Manual mode, you can use the 1

or

2 button or the DJ JOG control.

 

- In the Preset mode, you can use the 1

or

2 button or the DJ JOG control on 

the product to search for a stored radio 
station.

To listen to a stored station, follow these steps:
1.  Select FM by pressing the TUNER/AUX 

button on the product or remote control.

2.  Press the TUNING MODE button on the 

remote control until “PRESET” is displayed.

3.  Press 1, 2 button on the main unit or 

TUNING/ALBUM ,, . on the remote 

control to select a preset number. 
or 
Turn the DJ JOG control left or right on 

the main unit to select the stored station.

For each step, you have a few seconds to set 
the required options. If you exceed this time, 
you must start again.
1.  Press the TIMER SET button on the remote 

control twice. "CLOCK " is displayed.

2.  Press the ¬ button on the remote 

control. The hour flashes.
•  T

o increase the hours: TUNING/ALBUM ,

•  To decrease the hours: TUNING/ALBUM .

3.  When the correct hour is displayed, press 

the ¬ button, and then the minutes 

flash.
•  To increase the minutes: TUNING/

ALBUM ,

•  To decrease  the minutes: TUNING/

ALBUM .

4.  When the correct minute is displayed, 

press the ¬ button, and then " TIME" 
appears in the display.

The timer enables you to set the product to 
switch on or off at specific times automatically.
•  Before setting the timer, check that the 

current time is correct.

•  For each step, you have a few seconds to set 

the required options. If you exceed this time, 
you must start again.

•  If you no longer want the product to be 

switched on or off automatically, you must 
cancel the timer by pressing the TIMER 
ON/OFF button.

1.  Press the TIMER SET button until 

is displayed.

2.  Press the ¬ button.

Result: ON is displayed for a few seconds. 

You can set the timer switch-on time.

02680D-MX-HS6000-ZA-ENG-20140304.indd   21

2014/3/17   15:47:46