Samsung MX-HS7000 用户手册

下载
页码 31
Rear Panel
2
3
4
5
6
7
1
MX-HS6000
2
3
4
5
6
7
1
MX-HS7000
1
Cooling fan
•  The fan operates while the unit is powered 
on. 
If you set the unit to the minimum volume, 
the fan won't operate.  
Secure a minimum of 6 inches (15 cm) of 
clear space on all sides of the fan when 
installing the product.
2
AUX IN 2 Terminals
1. 
Use an Audio Cable (not supplied) to 
connect AUX IN 2 on the product to Audio 
Out on an external analog output device.
•  Be sure to match connector colors.
•  If the external analog output device has 
only one Audio Out jack, connect either 
left or right terminal.
•  Press the TUNER/AUX button to select 
AUX 2.
•  If the product is in AUX mode for more 
than eight hours and no buttons on the 
front panel or remote are pushed, the 
system will turn off.
3
FM Antenna Terminals
1. 
Connect the FM antenna to the FM 
antenna connector terminal.
2. 
Slowly move the antenna wire until you find a 
location where reception is good, then fasten 
it to a wall or other rigid surface.
3. 
If reception is poor, you may need to install 
an outdoor antenna. To do so, connect an 
outdoor FM antenna to the FM socket on 
the rear of the system using a 75Ω coaxial 
cable (not supplied).
4
LED Terminals for Speaker Beat Waving.
5
ONLY FOR SERVICE
•  This jack is just for testing, please don't use 
it.
6
POWER
•  Insert only provided power cable.
7
2.1 CH Speaker Terminals (MX-HS6000) 
2.2 CH Speaker Terminals (MX-HS7000)
1. 
To achieve the correct sound quality, 
when you connect the speakers, match 
the color of the speaker plugs to the color 
of the speaker jacks. See below.
•  LEFT channel (marked   ).
•  RIGHT channel (marked   ).
•  Don't force the Purple SUBWOOFER 
connector into the White or Red speaker 
jack.
Getting Started
8
  English
02680D-MX-HS6000-ZA-ENG-20140304.indd   8
2014/3/17   15:47:35