Intel SR1695GPRX1AC 用户手册
Intel® Server System SR1695GPRX TPS
Hard Disk Drive Support
Revision 1.5
39
Intel order number: G11332-006
Pin#
Signal Description
S3
SAS#_TX_DN (# = 0…2)
S4 Ground
S5
S5
SAS#_RX_DN (# = 0…2)
S6
SAS#_RX_DP (# = 0…2)
S7 Ground
S8 Not
S8 Not
Used
S9 Not
Used
S10 Not
Used
S11 Not
Used
S12 Not
Used
S13 Not
Used
S14 Not
Used
P1 Not
Used
P2 Not
Used
P3 Not
Used
P4 Ground
P5 Ground
P6 P3V3
P7 P5V
P8 P5V
P9 P5V
P5 Ground
P6 P3V3
P7 P5V
P8 P5V
P9 P5V
P10 Ground
P11
LED_SAS#_ACT_L (# = 0…2)
P12 Ground
P13 P12V
P14 P12V
P15 P12V
P14 P12V
P15 P12V
PTH0 Ground
PTY1 Ground
3. SATA/SAS Drive Control Connectors (J1A2, J4A1, J6A2, and J8A2)
The passive backplane includes four drive control connectors. These are used to attach
SATA/SAS cables from the backplane to either the SATA ports on the server board, or to
SAS/SATA ports from an add-in card. Each drive control connector has the following pin-out.
SATA/SAS cables from the backplane to either the SATA ports on the server board, or to
SAS/SATA ports from an add-in card. Each drive control connector has the following pin-out.
Table 42. SATA/SAS Drive Control Connector Pin-out
Pin#
Description
1 GROUND
2
2
SATA # TX_DP (# = 0,1,2)
3
SATA # TX_DN (# = 0,1,2)
4 GROUND
5
5
SATA # RX_DN (# = 0,1,2)
6
SATA # RX_DP (# = 0,1,2)
7 GROUND
4. System Management(IPMB) Connector(J9A1)
The backplanes provide connectors to interface with system management buses. The following
tables define the pin-out for each of these connectors.
tables define the pin-out for each of these connectors.
Table 43. IPMB Connector Pin-out
Pin #
Description
1 SMB_5VSB_IPMB_DAT