Samsung RF8000 - Réfrigérateur de 28 pi³ à portes françaises, 3 portes (blanc) 用户手册
English - 11
SETTING
UP
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
installation of your refrigerator:
Philips
screwdriver (+)
Flat-blade screw
driver (-)
Socket wrench
(13/32”) (10 mm)
Pliers
Allen wrench
(3/16”) (5 mm)
With the door opened
1. Remove 3 screws holding down the TOP
TABLE (
1 ) and separate the connected wires.
(1)
2. Disconnect two connectors (
2 ) on the left side
door. To remove the water coupler from the
hinge, twist and pull it from the hinge.
Remove the water line (
hinge, twist and pull it from the hinge.
Remove the water line (
3 ) while pressing the
marked part (
4 ) of the water line coupler.
(2)
(3)
(4)
3. Pull and remove the hinge lever (
5 ).
Remove the ground screw (
6 ) attached to the
upper left door hinges with a philips screwdriver
(+). Remove the upper left and right door
hinges (
(+). Remove the upper left and right door
hinges (
7 ).
(5)
(7)
(6)
4. Lift the door straight up to remove.
5. Remove the screw (
8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+).
Remove the 2 hex head bolts (
screwdriver (+).
Remove the 2 hex head bolts (
9 ) attached to
the lower left and right door hinges with an allen
wrench (3/16”).
Remove the lower left and right door hinges
(
wrench (3/16”).
Remove the lower left and right door hinges
(
10 ).
Allen wrench
(10)
(8)
(9)
DA68-02953A-10.indb 11
2015. 11. 6. �� 11:11