Samsung dvd-hr735 用户手册

22 - English

There are several ways to output audio signal not
using scart cables. Select the audio connection that
best suits you below.

• Case 1 : Connecting to your TV
• Case 2 : Connecting to a stereo amplifier with AV

output jacks

• Case 3 : Connecting to an AV amplifier with a 

digital output jack

If your TV has audio input jacks, use this connection.

Manufactured under licence from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of
Digital Theatre System, Inc.

1. Connect Component video cables(not supplied)

between the COMPONENT OUT(Y,P

B

,P

R

) jacks on

HDD & DVD RECORDER and COMPONENT
IN(Y,P

B

,P

R

) jacks on your TV.

• You will enjoy high quality and accurate colour

reproduction images.

2. Connect audio cables (white and red) between the

AUDIO OUT jacks on the HDD & DVD
RECORDER and AUDIO IN jacks on TV (or AV
amplifier).
(See pages 22~23).

3. After connecting, refer to the pages 41~43.

■ 

Make sure that the colour coded
connections match. The Y, P

B

, P

R

component output jacks of your HDD &
DVD RECORDER must be connected to
the exact corresponding component input
jacks on your TV.

■ 

Progressive setting is only available when
the Video Out is set to Component. (See
pages 41~43)

01082E_HR735_EUR_01~58  4/11/06 8:46 PM  Page 22