Samsung Samsung Gear VR Innovator Edition 用户手册
Initial Configuration
•
To use the Gear VR, you must manually install the Gear VR software. When you connect the Samsung
GALAXY Note 4 to the Gear VR for the first time, the software installation will start automatically.
GALAXY Note 4 to the Gear VR for the first time, the software installation will start automatically.
Note: Before beginning the set up and configuration process, ensure that your mobile device is connected to a
Wi-Fi or mobile network. If prompted, tap OK to accept a data connection via your cellular network.
Wi-Fi or mobile network. If prompted, tap OK to accept a data connection via your cellular network.
Important: Tap Create Account and follow the prompts to create an Oculus account.
If you already have an Oculus account, tap Sign In and enter your information.
If you already have an Oculus account, tap Sign In and enter your information.
1. Carefully install the compatible mobile device into the Gear VR compartment. For more information refer
to
Important: A mobile device should be connected to the Gear VR connector. If this connection is not
properly made, you will not be prompted to continue with the initial set up process.
properly made, you will not be prompted to continue with the initial set up process.
2. When a voice prompt requests for you to remove the mobile device from the Gear VR, follow the
previous procedures to remove the mobile device (
).
Then perform steps 3-9 on the mobile device.
Note: These one-time on-screen set up and configuration procedures are displayed on the mobile device.
At this point you will complete the set up process on the removed mobile device.
At this point you will complete the set up process on the removed mobile device.
3. Read the on-screen information and tap Next on the mobile device’s screen. The necessary Gear VR
software will then begin to download onto your mobile device.
Note: If prompted, read the on-screen Google security message and select an option.
22