Samsung Microwave Combination Wall Oven with Digital Display 安装指南

4  English

Pr

epar

ation

Preparation

Checklist

Use this checklist to verify that you have completed each step of the installation 
process. This can help you avoid mistakes.
1.  Before installing the oven, be sure to verify the cabinet dimensions are correct 

for your unit and the required electrical connections are present.

2.  Refer to the installation manual for content regarding Safety, Cabinet 

Dimensions, Removing Packaging, Electrical Installation, Testing the 
Installation and Customer Service.

3.  To lift up the oven, hang the install handle onto the side hook of the unit.
4.  Move the oven unit into place in front of the cabinet opening, leaving the 

bottom packaging on the unit to avoid damaging flooring.

5.  Team lift the unit directly into the cabinet cutout taking care not to pinch 

fingers or scratch hands or arms. Make sure the electrical conduit reaches to 
the connection point properly.

6.  Slide the unit all the way into place, making sure to route the electrical conduit 

correctly.

7.  Fasten the oven unit to the cabinetry opening with screws supplied (using 

Philips screwdriver).

8.  Consult the complete installation instructions and follow the remainder of the 

procedures listed, including performing an operation test.

9.  All product literature and accessories are supplied (may be wrapped or boxed) 

with the oven.

10.  INSTALLER - Leave the literature pack and the accessories with the customer.

Prepare to install the oven

Phillips Screwdriver

Drill

Prepare to install the oven

8 screws (M4 L16)

8 Wood Screws For Mounting (6 screws 

needed for installation and 2 extra’s)

30” (76.2 cm)

Metal Bottom Trim

Materials needed

Junction Box

Wire Nuts

3

/

4

” Conduit Connector

Install_NQ70M6650D_DE68-04454A-00_EN.indd   4

1/9/2017   6:13:30 PM