Samsung Handheld Tablet PC 用户手册

183

The Wireless LAN device is operating properly, but I cannot connect to the

Internet or to another computer.

►

This is due to an incorrect conﬁguration, or a conﬁguration error. Check the

following:

A1 If you are using a computer-to-computer (Ad Hoc) network connection, check that

the name of the conﬁgured network (SSID) is correct.

A2 If you are using a network key (encryption key), you have to use the same network

key for an AP (Access Point) or a computer-to-computer network (Ad Hoc). The

network key of the AP is conﬁgured in the AP management program. Ask your net-

work administrator or AP manager for more detailed information.

A3 Check that the device driver is installed properly. If the driver is not properly in-

stalled, you will ﬁnd a yellow exclamation mark on the network icon by clicking

Start > Control Panel > System and Maintenance > Device Manager > Network

Adapter.

The signal strength is excellent, but I cannot connect to the network.

► Even if the signal strength is excellent, the network connection may not oper-

ate properly if the TCP/IP properties are not properly conﬁgured, or the net-

work key (encryption key) is incorrect.

A Check that the TCP/IP properties are conﬁgured properly. When connecting to an

AP, right-click the

Network Connections ( ) icon on the taskbar and select Net-

work and Sharing Center. If you click the View Status next to a connected wire-

less network device and then click the

Detail button, you can view the IP informa-

tion. If the IP is not allocated properly, the IP address will be displayed as follows

(e.g. 169.254.xxx.xxx).

If the network does not provide DHCP, you have to specify the correct IP address

by asking your network administrator.

Wireless Network (WLAN) Related