Samsung Handheld Tablet PC 用户手册

186

When connecting to a computer-to-computer (Ad Hoc) network, I cannot

connect to another computer on the same computer-to-computer network.

A1 Make sure that the security settings and network name of the computer-to-comput-

er (Ad Hoc) network are correct.

A2 Check the TCP/IP properties of the computers to be connected through the com-

puter-to-computer (Ad Hoc) network. All computers to be connected through the

computer-to-computer (Ad Hoc) network should be conﬁgured so that their IP ad-

dresses are within the same subnet range.

● If the TCP/IP Settings are conﬁgured to DHCP, the address is automatically con-

ﬁgured to an address within the subnet IP range. This will take about 2~3 min-

utes.

● If the IP address is conﬁgured to a static IP in the TCP/IP properties, select

Use the following IP address in the TCP/IP properties of the wireless adapter,

conﬁgure an IP address between 10.0.0.1~10.0.0.254, and a Subnet mask of

255.255.255.0, and try again.

● A ﬁxed IP is recommended for a small-sized network.
● If you are using a DHCP IP address, the system boot time may be extended.

When using a computer-to-computer (Ad Hoc) network, sometimes I cannot

search the access point.

A It may happen occasionally when you are using a computer-to-computer (Ad Hoc)

network connection. Even if you cannot ﬁnd some access points, the computer-to-

computer (Ad Hoc) network is operating properly. Click Refresh to view the latest

search result.