Samsung Galaxy Tab S2 NOOK 8.0 用户手册

4 

Assemble Your Device 

Getting Started

Assemble Your Device  

This section helps you to 

assemble your device. 

Install an Optional Memory Card 

You can install an optional microSD

™

 or 

microSDHC

™

 memory card (not included) to add 

more memory space to your device. 

Note: A memory card can be installed at any time; it 
is not necessary to install it prior to using the device. 

For more information on installing a memory card, 
see 

1.   Insert the removal tool into the hole on the 

memory card tray, and then push until the tray 
pops out. 

Caution: Exercise care when using the metallic 
removal tool to eject the memory card tray. 

2.  Place the memory card on the tray, positioned as 

shown. 

3.  Slide the tray back into the slot. 

Caution: If the memory card is not inserted correctly, 
the device cannot detect it. Reorient the memory card 
and place it back into the slot if it is not detected. 

Charge the Battery 

Your device is powered by a rechargeable, standard 
Li-Ion battery. A USB charger (charging head and 
USB cable) is included with the device for charging 
the battery from any standard outlet. 

The battery comes partially charged. A fully 
discharged battery requires up to four hours of 
charge time. You can use the device while charging. 

Note: It is recommended you fully charge the battery 
before using your device for the first time. 

Caution: Use only charging devices and batteries 
approved by Samsung. Samsung accessories are 
designed for your device to maximize battery life. 
Using other accessories may invalidate your warranty 
and may cause damage. 

1.   Insert the USB cable into the USB charger/ 

Accessory port. 

2.  Connect the USB cable to the charging head, 

and then plug the charging head into a standard 
outlet. 

3.  Unplug the charging head from the outlet and 

remove the USB cable from the device when 
charging is complete.