Samsung Freestanding Gas Ranges (NX58K3310 Series) 安装指南

English 25

Ins
tallation ins

truc

tions

Step 8. Check the ignition of surface burners and oven burners

Check the operation of all cooktop and oven burners after the range has been
installed and assembled, gas supply lines have been carefully checked for leaks,
and electrical power cord has been plugged in.
All surface and oven burners have electronic ignition.

To turn on a surface burner:
1. Push in and turn the control knob for

that surface burner to the LITE position.
The "clicking" sound indicates the
electronic ignition system is operating
properly. The burner will light in about
4 seconds, after the air has been purged
from the supply line.

2. After the burner lights, turn the control

knob to the desired setting. The
"clicking" sound will stop and the flame
height will change from Max. to Min.
during turning the control knob.

3. Repeat steps 1 and 2 to check the

operation of each surface burner in
succession.

NOTE

Place food in the oven after preheating
if the recipe calls for it. Preheating is
important for good baking results. After
the oven has reached the desired cooking
temperature, it will beep 6 times.

To start the bake burners

1. Press the Bake button.
2. If necessary, use the arrow buttons to change the default temperature (350 °F).

You can set the oven to any temperature from 175 °F to 550 °F.

3. Press the START/SET button.
4. When cooking is complete, press the OFF/CLEAR button.

To start the broil burners

1.  Press the Broil button once for HI temperature broiling or twice for LO.
2.  Press the START/SET button to start the broiler.
3.  When cooking is complete, press the OFF/CLEAR button.