Samsung Electric Dryers 用户手册

3

To enter Service Mode , press Mixed Load Bell + Temp. Keys 3 seconds in normal mode until it 

sends out a beeping sound.

If pressing Mixed Load Bell + Temp. Keys in Service mode , it will return Normal mode.

Even though entering Service mode, the operating cycle will not be influenced.

How to enter:
- 

After entering Service Mode, press the Wrinkle Prevent button to start the Wire Test.

During the test, “----” is displayed.

If the test result is normal after the test, “SG” is displayed.

If a problem occurs, the “AE3” error code is displayed.

This mode is default mode of entering service mode.

With Power On pressing Mixed Load Bell +Temp(DV431) or Wrinkle Prevent + Temp(DV231) 

for 3 seconds.

This action will put the dryer into sensor bar touch data mode

Dryer will display Sensor Bar data.

Definition of Cycle Count Mode:
- 

This mode is to bring up the total number of cycles that User have carried out.

How to enter:
- 

Press the Mixed Load Bell(DV431) orTime(DV231) key in Service Mode.

Definition of Software Revision Mode:
- 

It is to retrieve its software version

How to enter:
At Service Mode, press Temp until it sends out a beeping sound
ex) In case of “U1 05”, U1 means major version “U1”, 05 means minor version “05”.
- 

If press Temp key In Software Version Mode, it will return Service Mode.

To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before 
servicing, unless testing requires power.

(Technical)DV431AEP-02365D-03_EN.indd   3

2012-04-26   �� 10:42:54