Samsung 2017 QLED TV 用户手册

English - 7

One connect

To connect the Invisible Connection cable to the One Connect and your TV, take the following steps:

1.  Read all the instructions below before you begin.
2.  Carefully remove the Invisible Connector from its Styrofoam protector.
3.  Carefully unwind the cable (with the   icon) from the cable holder of the Invisible Connection. Unwind enough 

cable to make the connection between the TV and the One Connect Box.

 

– If you unwind the cable (with the   icon) from the cable holder, the cable may be entangled or damaged.

 

[ DO NOT bend the One Connect fiber optical cable. Especially, do not bend the cable at a right angle. You can damage or 

4.  Connect the connector with the   icon to the TV, and then connect the connector with the   icon to the One 

Connect as shown in the illustration above.

5.  Connect the One Connect AC power cord to the One Connect and to a power outlet as shown in the illustration 

above.

 • When connecting the Invisible Connection, use a Bending Cover, which prevents the cable of the Invisible 

Connection from being bent at a 90 degree angle. Failure to do so may cause damage to the cable.

 • When connecting the Invisible Connection, pay attention to the shapes of its connectors so that they are 

connected correctly. Failure to do so may cause product malfunction.

 • After connecting the Invisible Connection, wind the remaining cable around the cable holder of the 

Invisible Connection. Just winding or leaving the remaining cable as it is may cause damage to the cable.

 • When connecting the Invisible Connection, be careful not to twist the cable of the Invisible Connection. 

Failure to do so may cause performance degradation to the TV or damage to the cable.

 • To prevent the Invisible Connection from being damaged, do not subject the Connection to the following:

Bending

Twisting

Pulling

Stepping on

Pressing on

CLASS 1 LASER PRODUCT

 • Caution - Invisible laser radiation when open. Do not stare into beam.

 

– Do not bend or cut cables excessively.

 

– Do not place heavy objects on the cable.

 

– Do not disassemble the connector of the cable.

 • Caution - Use of controls or adjustments or performance of procedures other than those specified 

herein may result in hazardous radiation exposure.