Samsung French Door with Black Stainless CMF, 27.2 cu.ft, 771 L 用户手册

English - 18

When moving your refrigerator

To prevent floor damage, be sure the front

adjusting legs are in the up position (above

the floor).

Refer to ‘Adjusting the Level’ on page

22.

Flat-blade screw

driver(-)

Control Lever

FLOORING

For proper installation, you must place this

refrigerator on a level, hard surface that is the

same height as the rest of the floor.

This surface should be strong enough to support

a fully loaded refrigerator. To protect the finish of

the flooring, cut a large section of the cardboard

carton and place it under the refrigerator where

you are working.

When moving a refrigerator, you need to pull and

push it straight forwards or back.

Do not wiggle it from side to side.

CAUTION

REMOVING THE

REFRIGERATOR DOORS

For some installations, you need to remove the

fridge doors and freezer drawer so you can move

the refrigerator to its final location.

Do not remove the doors/drawers if you

don’t need to. If you do not need to remove the

refrigerator doors or drawers, go to ‘Adjusting the

Level’ on page 22. If you need to remove the

doors and drawers. continue below.

Before removing the doors or drawers, make sure

you read the following warnings:

Disconnect power to the refrigerator

before removing the door or drawer.

• Be careful not to drop, damage,

or scratch the doors/drawer while

removing them.

• Be careful not to injure yourself while removing

the doors/drawer.

• Reattach the doors/drawer properly to avoid:

- Moisture from air leakage.

- Uneven door alignment.

- Wasting energy due to improper door seal.

WARNING

DA68-02952C (EN)-03.indd 18

2016. 12. 2. �� 6:30