Samsung HT-F455 用户手册

English  

 

|

03

Connections

 Method 2  Connecting to a TV with a Video Cable - Good Quality

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.

| NOTE |

 

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection 

systems and the picture will be distorted on the television.

Using Anynet+(HDMI-CEC) (Samsung products only)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. 

Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable.

| NOTE |

 

The Anynet+ function supports some buttons of the remote control.

 

This function is not available if an HDMI cable does not support CEC.

 

Please check the Anynet+ logo (If your TV has an Anynet+ logo, then it supports Anynet+ function.)

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the 

mode changes in this order : DVD/CD ; D.IN ; AUX 1 ; AUX 2 ; USB ; FM

R

Red

W

White

Method 1

Method 2

External Devices

(Cable not supplied.)

(Cable not supplied.)

 Method 1  AUX 2 : Connecting an External Analog Component

Connect AUX IN 2 (Audio) on the back of the product to the Audio Out of the external Analog component. 



 Select the AUX 2 mode.

| NOTE |

 

Be sure to match the colors of the connecting jacks.

 

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to 

this product.

 

If no button actions for more than 8 hours in AUX mode, the power will automatically turn off.

 Method 2  OPTICAL : Connecting an External Digital Audio Component

Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the external digital 

component.  Select the D.IN mode.

 

If no OPTICAL signal for more than 25 minutes, the product will automatically turn off.