Samsung HT-F455 用户手册
|
20
English
Basic Functions
V SURROUND
V SURROUND
It is only operational when 2 Channel Audio is playing.
It will change 2 channel Audio Source to 5.1 channel
Sound and there is output.
Each time you press the V-SURROUND button on the
remote control.
Virtual Surround on Virtual Surround off
It will change 2 channel Audio Source to 5.1 channel
Sound and there is output.
Each time you press the V-SURROUND button on the
remote control.
Virtual Surround on Virtual Surround off
• Virtual Surround on: change 2 channel audio to
5.1 channel and there is Sound output by 5.1
channel.
• Virtual Surround off: Output of 2 channel Audio is
Sound output by 2 channel. (Original Sound).
TV SOUND
TV SOUND
You can listen via Home Theater Speaker or TV Speaker
with TV SOUND button.
1 .
Connect the HDMI cable to TV and Home theater.
2 .
Press the TV SOUND button on the remote control.
3 .
Each time you press the TV SOUND button, TV
SOUND ON/OFF flashes shortly on the Display
part on the Front panel, then change to D.IN.
-TV SOUND ON : Output to Home Theater Speaker.
-TV SOUND OFF : Output to Anynet+ connected TV
Speaker.
Ğ
Use in this case:
1) If you want to listen to the sound via home theater
speaker when you watch a TV.
2) If you want to listen to the sound from the USB media
2) If you want to listen to the sound from the USB media
that plugged to the TV via home theater speaker.
Ğ
TV SOUND ON/OFF support specification
Connected
TV
TV Anynet+
(HDMI-CEC)
Setting
TV
Sound
ON
TV
Sound
OFF
Anynet+
(HDMI-CEC)
supported
TV
ON
O
O
OFF
O
O
Anynet+
(HDMI-CEC)
supported
TV
No opeartion
O
O
\
Make sure that D.IN function is changed to TV CEC
ON state,otherwise ARC audio is not available .
Listening to Radio
Using buttons on the Remote Control
1 .
Press the FUNCTION button to select FM.
2 .
Tune in to the desired station.
• Preset Tuning 1 : You must first add a desired
• Preset Tuning 1 : You must first add a desired
frequency as a preset. Press the 5 button to
select PRESET and then press the TUNING/CH
(,.) button to select the preset station.
• Manual Tuning : Press the 5 button to select
MANUAL and then press the TUNING/CH (,.)
button to tune in to a lower or higher frequency.
• Automatic Tuning : Press the 5 button to select
MANUAL and then press and hold the TUNING/
CH (,.) button to automatically search the
band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound switches
• Each time the button is pressed, the sound switches
between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1 .
Press the FUNCTION button to select FM.
2 .
Press the TUNING/CH (,.) button to select
<89.10>.
3 .
Press the TUNER MEMORY button.
• Number flashes on the display.
• Number flashes on the display.
4 .
Press the TUNING/CH (,.) buttons to select
preset number.
• You can select between 1 and 15 presets.
5 .
Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
• Press the TUNER MEMORY button before
number disappears from the display.
• Number disappears from the display and the
station is stored in memory.
6 .
To preset another station, repeat steps 2 to 5.