Samsung MC28H5145VK Convection MWO with Curd, 28 L 用户手册

The following simple procedure enables you to check that your oven is working correctly 

at all times. If you are in doubt, refer to the section entitled “Troubleshooting” on the 

page 78.

The oven must be plugged into an appropriate wall socket. The turntable must be 

in position in the oven. If a power level other than the maximum (100 % - 900 W) is 

used, the water takes longer to boil.

Open the oven door by pulling the handle on the right side of the door.

Place a glass of water on the turntable. Close the door.

Press the START/+30s button and set the time to 4 or 

5 minutes, by pressing the START/+30s button the appropriate 

number of times.

Result:   The oven heats the water for 4 or 5 minutes. 

The water should then be boiling.

When power is supplied, “88:88” and then “12:00” is automatically displayed on the 

display.

Please set the current time. The time can be displayed in either the 24-hour or 12-hour 

notation. You must set the clock:

•  When you first install your microwave oven
•  After a power failure

Do not forget to reset the clock when you switch to and from summer and winter 

time.

1.  Press the Multi Function Selector Dial.

2.  Turn the Multi Function Selector Dial to set time display 

type. (12H or 24H)

3.  Press the Multi Function Selector Dial to complete the 

setup.

4.  Turn the Multi Function Selector Dial to set the hour.

5.  Press the Multi Function Selector Dial.

6.  Turn the Multi Function Selector Dial to set the minute.

7.  When the right time is displayed, press the Multi Function 

Selector Dial to start the clock.

Result:  The time is displayed whenever you are not 

using the microwave oven.

The following procedure explains how to cook or reheat food.

ALWAYS check your cooking settings before leaving the oven unattended.

Open the door. Place the food in the centre of the turntable. Close the door. Never switch

the microwave oven on when it is empty.

1.  Press the Microwave button.

Result:  The following indications are displayed:

  (microwave mode)

2.  Turn the Multi Function Selector Dial until the appropriate 

power level is displayed. 

At that time, press the Multi Function Selector Dial to set 

the power level.

•  If don’t set the power level within 5 seconds, 

Automatically changes to the cooking time setting stage.

3.  Set the cooking time by turning the Multi Function 

Selector Dial.

Result:  The cooking time is displayed.

MC28H5145VK_TL_EN_DE68-04362A-00.indd   14

4/17/2015   11:27:10 AM