Samsung RF29HFEDBSL 用户手册

English - 19

SETTING

Required Tools (Not provided)

You need the following tools to complete the
installation of your refrigerator:

Philips

screwdriver (+)

Flat-blade screw

driver (-)

Socket wrench

(13/32”) (10 mm)

Pliers

Allen wrench

(3/16”) (5 mm)

With the door opened

1. Remove 3 screws holding down the TOP

TABLE (

1 ) and separate the connected wires.

(1)

2. Disconnect two connectors (

2 ) on the left side

door.
To remove the water coupler from the hinge,
twist and pull it from the hinge.
Remove the water line (

3 ) while pressing the

marked part (

4 ) of the water line coupler.

(2)

(3)

(4)

3. Pull and remove the hinge lever (

5 ).

Remove the ground screw (

6 ) attached to the

upper left door hinges with a philips screwdriver
(+). Remove the upper left and right door
hinges (

7 ).

(5)

(7)

(6)

4. Lift the door straight up to remove.

5. Remove the screw (

8 ) attached to the

lower left and right door hinges with a philips
screwdriver (+).
Remove the 2 hex head bolts (

9 ) attached to

the lower left and right door hinges with an allen
wrench (3/16”).
Remove the lower left and right door hinges
(

10 ).

Allen wrench

(10)

(8)

(9)

DA68-02953B-01.indb 19

2016. 12. 16. �� 11:05