Acer Extensa 500 服务手册
Chapter 2
35
Startup Configuration
The Startup Configuration screen contains parameters that are related to
computer startup.
computer startup.
The following table describes the parameters in this screen. Settings in
boldface are the default and suggested parameter settings.
boldface are the default and suggested parameter settings.
Parameter
Description
Boot Display
Sets the display on boot-up.
When set to Auto, the computer automatically
determines the display device. If an external
display device (e.g., monitor) is connected, it
becomes the boot display; otherwise, the computer
LCD is the boot display. When set to Both, the
computer outputs to both the computer LCD and an
external display device if one is connected.
determines the display device. If an external
display device (e.g., monitor) is connected, it
becomes the boot display; otherwise, the computer
LCD is the boot display. When set to Both, the
computer outputs to both the computer LCD and an
external display device if one is connected.
Options: Auto or Both
Memory Test
Enables or disabled memory test on boot-up.
Options: Disabled or Enabled
Silent Boot
When enabled, hides the computer startup
messages on boot-up (the Extensa logo displays)
messages on boot-up (the Extensa logo displays)
Options: Enabled or Disabled
System Boot
Drive
Drive
Specifies the boot sequence (the order of drives
that the computer will attempt to boot from). For
example, when set to Drive A Then C, the computer
attempts to boot from the floppy drive. If no
bootable floppy disk is in drive A, the computer
boots from the hard disk.
that the computer will attempt to boot from). For
example, when set to Drive A Then C, the computer
attempts to boot from the floppy drive. If no
bootable floppy disk is in drive A, the computer
boots from the hard disk.
Options: Drive A Then C, Drive A, Drive C, Drive C
Then A
Then A