Apple designing airport networks 用户手册
Chapter 4
AirPort Network Designs
23
Choose AirPort from the Show pop-up menu in the Network pane of System
Preferences. Then choose Using DHCP from the Configure IPv4 pop-up menu in
the TCP/IP pane.
Preferences. Then choose Using DHCP from the Configure IPv4 pop-up menu in
the TCP/IP pane.
If you can’t open the base station’s configuration:
1
Make sure your network and TCP/IP settings are configured properly.
Choose AirPort from the Show pop-up menu in the Network pane of System
Preferences. Choose Using DHCP from the Configure IPv4 pop-up menu in the
TCP/IP pane.
Preferences. Choose Using DHCP from the Configure IPv4 pop-up menu in the
TCP/IP pane.
2
Make sure you entered the AirPort Extreme Base Station or AirPort Express password
correctly. The default password is public. If you have forgotten the base station
password, you can reset it to public by resetting the base station.
correctly. The default password is public. If you have forgotten the base station
password, you can reset it to public by resetting the base station.
To temporarily reset the base station password to public, press and hold the reset
button for one second. To reset the base station back to its default settings, hold the
reset button for five full seconds.
button for one second. To reset the base station back to its default settings, hold the
reset button for five full seconds.
If you are on an Ethernet network that has other base stations, or you are
using Ethernet to connect to the base station:
AirPort Admin Utility scans the Ethernet network to create the list of base stations in
the Select Base Station window. As a result, when you open AirPort Admin Utility, you
may see base stations that you cannot configure.
using Ethernet to connect to the base station:
AirPort Admin Utility scans the Ethernet network to create the list of base stations in
the Select Base Station window. As a result, when you open AirPort Admin Utility, you
may see base stations that you cannot configure.
Setting Up the AirPort Network
The first step in configuring your base station is setting up the AirPort network it will
create. You can set up most AirPort networks using the AirPort Setup Assistant. Open
the setup assistant, located in Applications/Utilities. Follow the onscreen instructions
and enter the information from your ISP or network administrator.
create. You can set up most AirPort networks using the AirPort Setup Assistant. Open
the setup assistant, located in Applications/Utilities. Follow the onscreen instructions
and enter the information from your ISP or network administrator.
To configure a network manually or set advanced options, open your base station’s
configuration in AirPort Admin Utility, located in Applications/Utilities.
configuration in AirPort Admin Utility, located in Applications/Utilities.
1
Choose the network of the base station you want to configure from the AirPort status
menu.
menu.
2
Open AirPort Admin Utility and select the base station from the list. If you don’t see the
base station you want to configure, click Rescan to scan for available base stations, then
select the base station.
base station you want to configure, click Rescan to scan for available base stations, then
select the base station.
LL0214.book Page 23 Monday, October 25, 2004 4:06 PM