AASTRA phone 312 用户手册

下载
页码 82
68
Appendix 
Servicing and maintenance
Your phone is a product that meets the highest requirements for both design and construction. It
should therefore be handled with care. The following suggestions are intended to help you to enjoy
using this product for a long time.
Observe all safety instructions on page 1. These instructions are equally valid for the handset, the
charging point and all accessories.
To clean the phone, first remove the mains plug from the charging point. Wipe the devices with an
anti-static cloth or a slightly dampened, soft leather cloth, and then finally wipe with a dry cloth.
Note
: Never spray the phone with cleaning products or solvents.
Clean the charging contacts of the handset and the charging point with a lint-free cloth.
Environmental characteristics and disposal
This product was produced in an environmentally friendly way and is suitable for recycling accord-
ing to legal requirements and the 2002 manufacturer’s guidelines.
With regard to low energy consumption, long life utility and ease of use, fewer materials and com-
ponents were developed, and those that were developed are environmentally sound.
You can contribute to ensuring your device has a long operational life but observing the safety
instructions, the information on the operational life of the battery, and the service and maintenance
instructions.
Advice for disposal
To avoid any negative effects for the environment and public health which could arise from the dis-
posal of electrical and electronic devices, which contain dangerous substances, the directives of the
European Parliament and the Council
• Directive 2002/96/EC “Electrical and Electronic Equipment” and
•  Directive 2002/95/EC “Restriction of use of certain hazardous substances in electrical and elec-
tronic equipment”
are legally regulated in all countries of the EU.
The legislation is primarily aimed at avoiding waste of electrical and electronic devices, but is also
aimed at reusing, recycling and other forms of utilization of these types of waste in order to reduce
the amount of waste thrown away and to lower the amount of harmful substances from electrical
and electronic devices in the waste.