Access virus os4 用户手册
ACCESS VIRUS OS4
247
PRIORITY
PRIORITY
This parameter lets you control
how the Virus“steals notes when
its polyphonic performance is
maxed out. In the first position,
"LOW", the voices of all PARTs have
the same priority when one voice
is switched off to accommodate a
new voice. When you set the Prior-
ity of a PART to "High", the Virus
will not “steal” any notes from the
voices of this PART. Use this param-
eter sparingly. In other words, if
you set all Parts to High, you’re
defeating the purpose of this
parameter. In this case, it wouldn’t
have any effect since the priority of
all voices is the same.
how the Virus“steals notes when
its polyphonic performance is
maxed out. In the first position,
"LOW", the voices of all PARTs have
the same priority when one voice
is switched off to accommodate a
new voice. When you set the Prior-
ity of a PART to "High", the Virus
will not “steal” any notes from the
voices of this PART. Use this param-
eter sparingly. In other words, if
you set all Parts to High, you’re
defeating the purpose of this
parameter. In this case, it wouldn’t
have any effect since the priority of
all voices is the same.
01111111111111111112
1 A0 OvertureCK
Priority Low≤
Priority Low≤
61111111111111111154
INSTALLING AN OPER-
ATING SYSTEM UPDATE
The Virus b, kb and Indigo use an
identical operating system. The
differences in hardware is detected
automatically.
identical operating system. The
differences in hardware is detected
automatically.
1
1
1
1
Load the MIDI file into your
sequencer and make sure you have
chosen the right MIDI channel and
port settings. The MIDI file con-
tains the new software for the
Virus, packed in MIDI Sysex data.
chosen the right MIDI channel and
port settings. The MIDI file con-
tains the new software for the
Virus, packed in MIDI Sysex data.
2
2
2
2
Ensure that the MIDI clock
option is disabled (mixing SysEx
data and the MIDI clock can lead to
malfunctions of your MIDI inter-
face).
data and the MIDI clock can lead to
malfunctions of your MIDI inter-
face).
3
3
3
3
Start your sequencer to play-
back the MIDI-file.
At this stage, you should be able to
watch the VIRUS counting up the
received blocks. If the display
shows ”RECEPTION FAILED,” then a
transmission error has occurred.
This can be caused by a buffer
overrun of the MIDI interface. In
this case, you will need to upload
the entire file again. Lower the
tempo of your sequencer before
uploading (e.g. 60 bpm). To pro-
At this stage, you should be able to
watch the VIRUS counting up the
received blocks. If the display
shows ”RECEPTION FAILED,” then a
transmission error has occurred.
This can be caused by a buffer
overrun of the MIDI interface. In
this case, you will need to upload
the entire file again. Lower the
tempo of your sequencer before
uploading (e.g. 60 bpm). To pro-