Acomdata m-2163-v1e 用户手册

下载
页码 53
–  42  –
into Sleep mode. The immediate solution is to restart your 
computer. To prevent this problem from reoccurring, go 
into your Power Settings/Energy Saver and set it to where it 
never goes into Sleep mode.
The Drive feels warm when it’s powered on.
A: When in operation, the Drive may feel quite warm to the 
touch. This is normal.
The Drive gives me a “Device cannot start. Code (10).”
A: This is a power issue. Make sure your connections are 
secure. The other possibility is that the Drive has malfunc-
tioned and requires service.
I don’t see the Drive in My Computer, but it does appear in 
Device Manager. (Windows XP & 2000 only)
A: Right-click on My Computer. Select Manage in the 
pop-up menu. In the Computer Management window, 
select Storage, then select Disk Management. In the Disk 
Management window, you should see a list of available stor-
age devices. Look for the Disk that has a capacity closest to 
your AcomData Drive. Right-click on the right-hand box; in 
the pop-up menu select Delete Partition. Once you do this, 
it will say “Online” & “Unallocated.” Right-click on the box 
and select Create New Partition in the pop-up menu. When 
the Partition Wizard appears, select Primary Partition and 
click on Next. You will see a default value for the AcomData 
Drive; click Next. You will then see a drive letter (you can 
change this drive letter if you wish); click Next. You will then 
be asked to format the AcomData Drive.
When I try to format my Drive in Windows 2000/XP I get 
the message: “Could not complete format.”
A: This problem can occur if you are using an expansion