4ipnet EAP200 4IP EAP200 产品宣传页
产品代码
4IP EAP200
All contents are Copyright © 2011 4IPNET, INC. All rights reserved. v150.012411
S P E C I F I C A T I O N S
Wireless Radio
Frequency band: 2.4 GHz
Wireless architecture:
Wireless architecture:
(1) AP mode
(2) Repeater mode (WDS / Universal Repeater)
(2) Repeater mode (WDS / Universal Repeater)
Modulation:
(1) OFDM (64-QAM, 16-QAM, QPSK, BPSK)
(2) DSSS (CCK, DBPSK, DQPSK)
(2) DSSS (CCK, DBPSK, DQPSK)
Channels:
(1) USA (Channel 1~11)
(2) Japan (Channel 1~14)
(3) Europe (Channel 1~13)
(2) Japan (Channel 1~14)
(3) Europe (Channel 1~13)
Data rate with auto fallback:
(1) 802.11b: 1 ~ 11 Mbps
(2) 802.11g: 6 ~ 54 Mbps
(3) 802.11n: 6.5 ~ 300Mbps
(2) 802.11g: 6 ~ 54 Mbps
(3) 802.11n: 6.5 ~ 300Mbps
Transmit Power:
(1) 802.11b: Up to 18 dBm
(2) 802.11g: Up to 16 dBm
(3) 802.11n: Up to 16 dBm
(2) 802.11g: Up to 16 dBm
(3) 802.11n: Up to 16 dBm
Antenna: 2 x detachable with SMA connectors
Receiver Sensitivity:
Receiver Sensitivity:
(1) 802.11b: 11Mbps@-84 dBm
(2) 802.11g: 54Mbps@-69 dBm
(3) 802.11n: 300Mbps@-65 dBm
QoS-WMM
DiffServ/TOS
IEEE 802.1p/COS
IEEE 802.1Q Tag VLAN priority control
IEEE 802.11e WMM
IEEE 802.1p/COS
IEEE 802.1Q Tag VLAN priority control
IEEE 802.11e WMM
Handover & Roaming
IEEE 802.11f IAPP
IEEE 802.11i pre-auth (PMKSA cache)
IEEE 802.11i pre-auth (PMKSA cache)
System Management
Web-based administration
SNMP v1/v2c
Provides Event Log
SYSLOG information support
Statistics
Configuration backup and restore
Restore to factory default setting via Web or Console
Firmware upgrade
Capable of performing RADIUS Accounting and
SNMP v1/v2c
Provides Event Log
SYSLOG information support
Statistics
Configuration backup and restore
Restore to factory default setting via Web or Console
Firmware upgrade
Capable of performing RADIUS Accounting and
Accounting Update
4ipWES (Press-n-Connect) button for WDS Easy Setup
Support Tunneled AP Management with 4ipnet
Support Tunneled AP Management with 4ipnet
Secure WLAN Controllers
Security
WEP (64/128/152 bits)
EAP-TLS + Dynamic WEP
EAP-TTLS + Dynamic WEP
PEAP/MS-PEAP + Dynamic WEP
WPA (PSK + TKIP)
WPA (802.1X certification + TKIP)
802.11i WPA2 (PSK + CCMP/AES)
802.11i WPA2 (802.1X certification + CCMP/AES)
EAP-TLS + Dynamic WEP
EAP-TTLS + Dynamic WEP
PEAP/MS-PEAP + Dynamic WEP
WPA (PSK + TKIP)
WPA (802.1X certification + TKIP)
802.11i WPA2 (PSK + CCMP/AES)
802.11i WPA2 (802.1X certification + CCMP/AES)
Setting for TKIP/CCMP/AES key's refreshing period
Hidden ESSID support
Layer 2 wireless isolation
Wireless Layer 2 Firewall
MAC Address filtering (MAC ACL)
MAC authentication with RADIUS servers
Maximum number of registered RADIUS servers: 2
Built-in Servers & Client Interfaces to Other Services
DHCP client
DNS client
SYSLOG client
RADIUS client
SNMP v1/v2c client
DNS client
SYSLOG client
RADIUS client
SNMP v1/v2c client
Wireless Signal Management
Number of ESSIDs (Virtual APs): 8
Number of associated clients per system: 128
Setting for maximum number of associated clients
Number of associated clients per system: 128
Setting for maximum number of associated clients
Hardware Specifications
IP50 Dust-proof metal case
LAN Port: 2 × 10/100 Base-T Ethernet with PoE
Console Port: 1 x DB9
USB Port: 1
Screw Terminal Block: 1
LED Indicators: 1 × Power, 2 × LAN, 1 × WLAN, 1 × WDS, 1 ×
LAN Port: 2 × 10/100 Base-T Ethernet with PoE
Console Port: 1 x DB9
USB Port: 1
Screw Terminal Block: 1
LED Indicators: 1 × Power, 2 × LAN, 1 × WLAN, 1 × WDS, 1 ×
WES, 1 × USB
Physical and Power
Power adaptor (included)
(1) AC Input: 100~240 VAC, 50~60 Hz
(2) DC Output: 12V, 1.5A
(2) DC Output: 12V, 1.5A
Alternative Power:
(1) 802.3af PoE (PSE not included)
(2) 12~48 VDC DC power input
(2) 12~48 VDC DC power input
Form factor: Wall Mountable
Dimensions (W x D x H): 8.0" x 5.3" x 1.4"
(204 mm x 134 mm x 35 mm)
Weight: 1.3 lbs (0.61 kg)
Dimensions (W x D x H): 8.0" x 5.3" x 1.4"
(204 mm x 134 mm x 35 mm)
Weight: 1.3 lbs (0.61 kg)
Environment
Operation Temperature: -30 ~ 70 °C
Storage Temperature: -40 ~ 85 °C
Operation Humidity: 10% ~ 80% (Non-condensing)
Storage Humidity: 5% ~ 90% (Non-condensing)
Storage Temperature: -40 ~ 85 °C
Operation Humidity: 10% ~ 80% (Non-condensing)
Storage Humidity: 5% ~ 90% (Non-condensing)
Certifications
FCC, CE
RoHS compliant
RoHS compliant
Package Contents
4ipnet EAP200 x 1
CD-ROM (with User's Manual and QIG) x 1
Quick Installation Guide (QIG) x 1
Console Cable x 1
Ethernet Cable x 1
Power Adapter (DC 12V) x 1
Antenna x 2
Screw pack x 1
Ground Cable x
CD-ROM (with User's Manual and QIG) x 1
Quick Installation Guide (QIG) x 1
Console Cable x 1
Ethernet Cable x 1
Power Adapter (DC 12V) x 1
Antenna x 2
Screw pack x 1
Ground Cable x
** Specifications subject to change without notice
®
4ipnet
®
EAP200