Alcatel-Lucent speedtouch 536 用户手册
Chapter 2
Basic Installation
E-DOC-CTC-20050429-0034 v1.0
5
2 Basic Installation
Before you begin
Make sure to read the safety instructions and regulatory notices first. The safety
instructions can be found on the Setup CD and/or may also be provided as printed
booklet.
instructions can be found on the Setup CD and/or may also be provided as printed
booklet.
ADSL service
The ADSL service must be up and running on your telephone or ISDN line.
If both telephone and ADSL service are simultaneously available from the same
copper pair, you will need a central splitter or distributed filters for decoupling ADSL
and telephone signals.
If both telephone and ADSL service are simultaneously available from the same
copper pair, you will need a central splitter or distributed filters for decoupling ADSL
and telephone signals.
Computer requirements
To connect a computer via Ethernet, make sure your computer is equipped with an
Ethernet network interface card (NIC). To connect a computer via USB, you need a free USB port on your computer or a
connected USB hub.
Ethernet network interface card (NIC). To connect a computer via USB, you need a free USB port on your computer or a
connected USB hub.
!
Public telephone lines carry voltages that can cause electric shock. Only try
to set up splitter/filters that have been designed to be installed by unqualified
personnel. For further assistance, contact your service provider.
to set up splitter/filters that have been designed to be installed by unqualified
personnel. For further assistance, contact your service provider.