Alpine cda-9847r 用户手册

-EN

Installation

Slide mounting sleeve from main unit (see
“Removal” on this page). Slide the mounting sleeve
into the dashboard and fix it with the metal
shackles.

When your vehicle has the Bracket, mount the long
hex bolt onto the rear panel of the CDA-9847R and
put the Rubber Cap on the hex bolt. If your vehicle
does not have the Mounting Support, reinforce the
head unit with the metal mounting strap (not
supplied). Connect all the leads of the CDA-9847R
according to details described in the CONNECTION
section.

• For the screw *, provide a proper screw to the chassis installing

location.

Slide the CDA-9847R into the dashboard. Slide the
CDA-9847R into the dashboard until it clicks. This
ensures that the unit is properly locked and will not
accidentally come out from the dashboard. Install
the Detachable Front Panel.

Removal

1 Remove the detachable front panel.

2 Insert the optional brackets into the back, along the

guides on either side of the unit. The unit can now be
removed from the mounting sleeve.

3 Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Front frame

Dashboard

Rubber Cap
(Included)

Bracket

Mounting sleeve
(Included)

Hex Bolt
(Included)

this unit

No Pressure Here

∗

Metal Mounting Strap

Screw

Bolt Stud

Hex Nut (M5)

this unit

Screws (M5

× 8)

(Included)

Mounting Bracket

this unit

Bracket
(Included)