ASUS a1000cd 用户手册
75
Appendix
Managing and Updating Your BIOS
It is recommended that you save a copy of the original BIOS along with a Flash Memory Writer utility
(AFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later. AFLASH.EXE is a
Flash Memory Writer utility that updates the BIOS by uploading a new BIOS file to the programmable flash
ROM on the motherboard. This file works only in DOS mode. To determine the BIOS version of your
Notebook PC, check the code displayed on the upper left-hand corner of your screen during bootup or
run AFLASH.EXE. Larger numbers represent a newer BIOS file.
(AFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later. AFLASH.EXE is a
Flash Memory Writer utility that updates the BIOS by uploading a new BIOS file to the programmable flash
ROM on the motherboard. This file works only in DOS mode. To determine the BIOS version of your
Notebook PC, check the code displayed on the upper left-hand corner of your screen during bootup or
run AFLASH.EXE. Larger numbers represent a newer BIOS file.
1. Type FORMAT A:/S at the DOS prompt to create a bootable system floppy disk. DO NOT copy
AUTOEXEC.BAT & CONFIG.SYS to the disk.
2. Type COPY D:\AFLASH\AFLASH.EXE A:\ (assuming D is your CD-ROM drive) to copy
AFLASH.EXE to the just created boot disk.
NOTE: AFLASH works only in DOS mode. It will not work with DOS prompt in Windows and
will not work with certain memory drivers that may be loaded when you boot from your hard
drive. It is recommended that you reboot using a floppy.
will not work with certain memory drivers that may be loaded when you boot from your hard
drive. It is recommended that you reboot using a floppy.
3. Reboot your computer from the floppy disk. NOTE: BIOS setup must specify “Floppy” as the first
item in the boot sequence.
4. In DOS mode, type A:\AFLASH <Enter> to run AFLASH.
CAUTION! If “unknown” is displayed after Flash Memory:, the memory chip is either not
programmable or is not supported by the ACPI BIOS and therefore, cannot be programmed by
the Flash Memory Writer utility.
programmable or is not supported by the ACPI BIOS and therefore, cannot be programmed by
the Flash Memory Writer utility.
5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Current
BIOS To File screen appears.
6. Type a filename and the path, for example, A:\XXX-XX.XXX and then press <Enter>.
Managing and Updating Your BIOS From Your Hard Disk Drive
If you do not want to use a floppy disk or CD when managing or updating the BIOS. You can copy the files
to your hard disk drive. The root directory will be the most convenient location. Substitute A:\ with C:\ for
the procedures on these two pages. Instructions on booting to DOS from your hard disk drive:
to your hard disk drive. The root directory will be the most convenient location. Substitute A:\ with C:\ for
the procedures on these two pages. Instructions on booting to DOS from your hard disk drive:
1. Windows 95/98: Turn ON your Notebook PC and press [F8] before the Windows screen appears.
Choose the option “Command prompt only”.
Windows ME: You need the bootable Windows ME CD (WinME RCD) to boot into DOS mode.
Windows ME: You need the bootable Windows ME CD (WinME RCD) to boot into DOS mode.
2. At the “C:\” prompt (where the BIOS update files are located), type <aflash> and then press [Enter].
CAUTION! If your hard disk drive contains necessary data or is already bootable, DO NOT
FORMAT your hard disk drive as instructed for the floppy diskette. See next page for details on
updating your BIOS.
FORMAT your hard disk drive as instructed for the floppy diskette. See next page for details on
updating your BIOS.