ASUS mypal a600 用户手册
Avolites Pearl 2000 Operators Manual - page
72
P2000MAN.DOC 19/10/99 17:59
To Copy a Chase :
•
Press and hold down the grey ADD button of the Chase you wish to
Copy.
You are asked to press a Playback SWOP button
.
•
Press the SWOP button of the Playback Channel you wish the Copy to
occupy.
You can change Roller Pages and Facets if you need to while the ADD button
is still held down
.
Linked Copies can be replayed and edited like any other Chase, but any
changes will affect all the Linked Chases.
changes will affect all the Linked Chases.
⇒
A good idea if you need to run the same Chase at different times
throughout your show, is to Copy the Chase onto the same Playback
Fader of each Roller Page or Facet you require. This way, you can raise
and lower the same Fader or use the same ADD button to start the
Chase.
Fader of each Roller Page or Facet you require. This way, you can raise
and lower the same Fader or use the same ADD button to start the
Chase.
7.17 Photocopying a Chase
If you want to duplicate a Chase (or Memory), but don’t want it Linked to any
other Chase, use PHOTOCOPY.
other Chase, use PHOTOCOPY.
•
Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
•
Press the blue PHOTOCOPY button on the Program Select bank.
Its LED
will light up
.
•
Press and hold down the grey ADD button of the Chase you wish to
Photocopy.
You are asked to press a Playback SWOP button
.
7.18 To jump to any Chase step
You can go to any Chase Step in a Connected Chase whether it is stopped
or running. If it is running, it will jump to the Chase Step and continue to run.
or running. If it is running, it will jump to the Chase Step and continue to run.
You can do this in Program or Run mode.
•
Connect the Chase.
•
Type the step number on the Keypad.
Do not press ENTER.
•
Press the Connect button.
The result of this is that an existing Fading Chase Step will immediately
terminate, and the new step will Fade in using its programmed Times. If the
step is Unlinked, you must press the Go button.
terminate, and the new step will Fade in using its programmed Times. If the
step is Unlinked, you must press the Go button.
7.19 The Screen Chase control box
At the bottom of the Screen is the Chase Control Box. It is to the left on the
Pearl.
Pearl.
This box shows in figures from the top down :
•
Press the SWOP button of the Playback Channel you wish the
Photocopy to occupy.
You can change Roller Pages if you need to while the ADD
button is still held down.