ASUS V6-P7H55E 用户手册
4-4
Chapter 4: BIOS setup
4.1.2
ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
Note
ASUSTek EZ Flash 2 BIOS ROM Utility V3.36
Current ROM
A:
BOARD:
P5QPL-VM EPU
VER:
0206
(H:00 B:03)
DATE:
03/14/2009
Update ROM
FLASH TYPE:
MXIC 25L8005
PATH:
A:\
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
Before you start using this utility, download the latest BIOS file from the ASUS
website at www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port,
1. Insert the USB flash disk that contains the latest BIOS file to the USB port,
then launch EZ Flash 2 in any of these two ways:
• Press <Alt> + <F2> during POST.
• Enter the BIOS setup. Go to the Tools menu, select EZ Flash 2, and
press <Enter> to enable it.
2. Press <Tab> to switch between drives until the correct BIOS file is found,
then press <Enter>. EZ Flash 2 performs the BIOS updating process and
automatically reboots the system when done.
• This function supports USB flash disks with FAT 32/16 format and single
partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!