ASUS xitpad control 用户手册
щ装͞ڱ
Αਕ设ؠᦘ测试
ѩഫ戏Պ备;5轴23键γΐ视觉Ă数ф)̙ܪ灯*ሀёሀ拟)ܪ灯*ሀёĂ连发ᦘੵĄ
тңؠ义
тңפঐ
Nbdsp΄ะ۞ిޘ设ؠ
ڦຍ
ĆThe definition and clearance of Turbo function
(A), Definition of Turbo function Under Digital mode, the buttons “1 to 8” can be defined
with Turbo function. Under Analog mode, the buttons “1 to 8” and “11, 12” can be defined with Turbo
function. For an example: press Turbo button first, then press any button, e.g. button “3”.
Press Turbo button again. Thus, button “3” is with Turbo function.
Remember not to press “Turbo” and button “3” at the same time because this will cause the buttons ‘1 to 8”
and “11, 12” to be with Turbo function under Analog mode, and cause the nullification of Macro function,too.
(B), Clearance of Turbo function
a) Press Clear button, and the Turbo function on all buttons vanishes. Remember that there is no way to clear
the Turbo function on one button, but on all buttons.
b) When buttons “5, 6, 11, 12” are defined with both Macro and Turbo functions at the same time, the Turbo
function will be null until the Macro function is cleared.
5. Troubleshooting
ĆIf the game controller doesn’t work after setting up Software and Hardware:
(A), Please check whether the controller cable is steadily connected with your PC;
(B), Make sure that the correct options are selected. “Game Port Controller” in the “Game Controller” in menu
“Control Panel” is “Confirmation”, and “Controller ID” shows “1”.
(C), Make sure that I/O value of game controller doesn’t impact with that of other accessories.
(D), Please restart your PC if the game controller still cannot work.
ĆThe driving system “PC Dual Shock” cannot be installed or there is no reaction
while testing the controller after installation.
DirectX Version is too low. Please change to DirectX 7.0 Version or up.
ĆThere is no vibration from motor while playing racing games.
Exit the game and reset. If it still cannot work normally, restart your PC.
ĆSome analog axes can go into effect automatically after you enter the games.
The game controller hasn’t been calibrated or hasn’t been confirmed after calibrations.
Enter Option Controllers Dead Zone to adjust the range of the dead zone, and make
sure the axe in the range of the dead zone.
魔技
力回馈震动手柄
中文使用说明书
ր统ᅮՐ
为˞让ଋٙ购买۞产ݡਕ顺Ӏщ装Ă请А①认ଋ۞计ზᨚ备ͽ˭条І;
Αਕ
说ځ图