Axis 26720r1 用户手册

An Event Type is a set of 

parameters describing how and 

when the Network Dome Camera is 

to perform certain actions.

If a door is opened, and an event 

has been configured to act on this, the Network 
Dome Camera can e.g. record and save video 
images to an FTP server or send a notification 
email to a pre-configured email address with a 
pre-configured message. Video images can be 
sent as an attachment with the email.

Triggered Event
A Triggered event is activated from, e.g:

• a switch (doorbell) connected to an input port on the Network Dome Camera
• lost signal from the camera
• a manually activated action e.g. from an action button in the web interface
• on restart (reboot) after e.g. power loss

How to set up a triggered event
This example describes how to set the Network Dome Camera to upload images when the 

main door is opened:

1. Click Add triggered on the Event types page.
2. Enter a descriptive name for the event, e.g. Main door.
3. Set the priority - High, Normal or Low (see online help files).
4. Set the Respond to Trigger... parameters when the event is to be active, 

e.g. only after office hours

5. Select the trigger alternative from the Triggered by... drop-down list, e.g. an Input 

port with a connected sensor if the door is opened.

6. Set the When Triggered... parameters i.e. set what the Network Dome Camera is to 

do if the main door is opened e.g. upload images to an FTP server.

7. Click OK to save the Event in the Event Types list.

 

Please use the online help files

for descriptions of each available option.