Allen-Bradley devicenet modules in logix5000 control systems 用户手册
Publication DNET-UM004A-EN-P - March 2004
Automatically Configure a DeviceNet Network 4-5
Set the Address and Baud Rate of a Device Via Software
2. Click Browse.
1. Start the Node Commissioning tool.
3. Check this box.
4. Browse to the DeviceNet network.
5. Type the current address for the
device. Out of the box, a device
uses address 63.
uses address 63.
6. Click OK.
7. Type the new address for the device.
8. Select the baud rate for the device.
9. Apply the change.
10. Look for confirmation here.