Antares autotune4 用户手册
51
To erase the last point entered, press <delete> on the keyboard (you
can press <delete> repeatedly to erase back to the first anchor point).
can press <delete> repeatedly to erase back to the first anchor point).
3. Set the Retune Speed to 0. Click the Correct Pitch button and play back
the sound to hear the effect.
4. Select the Curve tool and create a curve similar to the one shown
below. Click and hold the mouse button and drag to draw the curve.
When done, release the mouse button.
When done, release the mouse button.
5. Press Correct Pitch and play back the sound to hear the effect.
6. Vary the Retune Speed between 0 and 50 and note the effect.
Now that we have some yellow lines and curves on the Pitch Graph Display,
this would be a good time to become familiar with the functions of the
Arrow and Scissors Tools. (Refer back to Chapter 3 for detailed descriptions
of the Arrow and Scissors Tools' behaviors.)
this would be a good time to become familiar with the functions of the
Arrow and Scissors Tools. (Refer back to Chapter 3 for detailed descriptions
of the Arrow and Scissors Tools' behaviors.)
As you experiment in the following steps, press Correct Pitch and play back
the file to hear the effect of each action.
the file to hear the effect of each action.
7. Select the Arrow Tool.
8. Drag the Arrow Tool across the Pitch Graph to select objects.
9. Move the cursor over curves and anchor points. Practice selecting entire
curves and individual anchor points.
10. Use the Arrow Tool to drag selected curves and individual anchor
points.
11. Use the Arrow Tool to double-click anywhere on one of the existing
line (not curve) segments to create a new anchor point. Use the Arrow
Tool to drag the new point to a new position.
Tool to drag the new point to a new position.
12. Still using the Arrow Tool, double-click on the new anchor point you
created in Step 11 to delete it and return the line to its initial state.