Asrock 4coren73pv-hd720p 用户手册

3 5

NOTE. If you install Windows

XP / Windows

XP 64-bit on IDE HDDs and want to manage

(create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs, you still
need to set up “SATA Operation Mode” to [RAID] in BIOS first. Then, please set the
RAID configuration by using the Windows RAID installation guide part of the docu
ment in the following path in the Support CD:
.. \ RAID Installation Guide

Please select A and B for Windows

XP / XP 64-bit in RAID mode. (There are two RAID

drivers needed for RAID mode, you have to select them separately. Please specify the
first RAID driver and then specify again for the second one.)

A. NVIDIA RAID Driver (required)

B. NVIDIA nForce Storage Controller (required)

STEP 4: Install Windows

XP / XP 64-bit OS on your system.

After step1, 2, 3, you can start to install Windows

XP / Windows

XP 64-bit OS on your

system. At the beginning of Windows

setup, press F6 to install a third-party RAID

driver. When prompted, insert the SATA / SATAII driver diskette containing the NVIDIA

RAID driver. After reading the floppy disk, the drivers will be presented. Select the drivers
to install. The drivers are as below:

2.16.2 Installing Windows

Vista

/ Vista

64-bit With

RAID F

RAID Functions

unctions

If you want to install Windows

Vista

/ Windows

Vista

64-bit on your SATA /

SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A.

Enter BIOS SETUP UTILITY Advanced screen

IDE Configuration.

Set the “SATA Operation Mode” option to [RAID].

STEP 2: Use “RAID Installation Guide” to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide

STEP 3: Install Windows

Vista

/ Vista

64-bit OS on your system.

Insert the Windows

Vista

/ Windows

Vista

64-bit optical disk into the optical drive

to boot your system, and follow the instruction to install Windows

Vista

/ Windows

Vista

64-bit OS on your system. When you see “Where do you want to install Windows?

” page, please insert the ASRock Support CD into your optical drive,
and click the “Load Driver” button on the left on the bottom to load the NVIDIA

RAID

drivers. NVIDIA

RAID drivers are in the following path in our Support CD:

(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows

Vista

/ Vista

64-bit.)

.. \ I386 \ RAID_Vista

(For Windows

Vista

OS)

.. \ AMD64\ RAID_Vista64

(For Windows

Vista

64-bit OS)