Asrock 4core1333-viiv 用户手册

3 3

J_SENSE

OUT2_L

MIC_RET

PRESENCE#

GND

OUT2_R

MIC2_R

MIC2_L

OUT_RET

1. High Definition Audio supports Jack Sensing, but the panel wire on the

chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select

Chipset Configuration. Set the Front Panel Control option from
[Auto] to [Enabled].
F. Enter Windows system. Click the icon on the lower right hand
taskbar to enter Realtek HD Audio Manager.
For Windows

2000 / XP / XP 64-bit OS:

Click “Audio I/O”, select “Connector Settings”

, choose

“Disable front panel jack detection”, and save the change by
clicking “OK”.

Front Panel Audio Header

This is an interface for front

(9-pin HD_AUDIO1)

panel audio cable that allows

(see p.11 No. 32)

convenient connection and
control of audio devices.

USB_PWR

P+5

P-5

P+4

P-4

GND

DUMMY

USB_PWR

P+7

P-7

P+6

P-6

GND

DUMMY

USB_PWR

P-8

GND

DUMMY

USB_PWR

P+8

GND

P-9

P+9

USB 2.0 Headers

Besides four default USB 2.0

(9-pin USB8_9)

ports on the I/O panel, there are

(see p.11 No. 25)

three USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.

(9-pin USB6_7)
(see p.11 No. 23)

(9-pin USB4_5)
(see p.11 No. 26)